Network
Enter the correct network configurations and click on Update.
DO NOT update Network Selection with the value 0 (Disable).
If you update Network Selection with the value 0 (Disable), the gateway will get disconnected from all types of networks.
In such a case, to connect it to a network, follow the steps given in Gateway Onboarding.
1
Network Selection
1
0 = Disabled 1 = WiFi 2 = Ethernet 3 = 4G Enter the value of the network mode you wish to set.
2
SSID
Enter SSID (Service Set Identifier) of the WiFi network you wish to connect to in WiFi mode.
3
Password
Enter the Password of the SSID you have entered in WiFi mode.
4
DHCP
1
0 = Static 1 = Dynamic Enter desired IP configuration mode.
5
IP Address
192.168.23.218
The IP address to be assigned to the Gateway in the Static mode of IP configuration.
6
Gateway
192.168.23.1
Enter the gateway address where traffic destined for the internet is routed to in the Static mode.
7
Subnet
255.255.255.0
Enter Subnet mask of Gateway in the Static mode.
8
DNS1
27.109.1.2
Enter primary DNS server address in the Static mode.
9
DNS2
4.2.2.2
Enter secondary DNS server address in the Static mode.
10
Set APN
M2MISAFE
Enter APN for the cellular network in 4G mode.
Please refer to the Activity section to verify that the network configuration has been updated successfully.
Last updated