Gateway Onboarding

Gateway Portal is used to connect the Gateway to a Network and register it on the web application (Gateway Manager) for easier configurations.

1. Power on Gateway.

2. Check the MAC ID printed on Gateway.

The Gateway's access point (hotspot) name is your Gateway's model + last 4 digits of its MAC ID as shown in the figure below.

4GW-E(MAC Address)

4GW-D(MAC Address)

1. The Gateway acts as a hotspot for your device to connect. So, scan for the WiFi network on your personal computer and connect to the Gateway's hotspot.

1. Connect to the available network by entering the password Aliter@123

1. Open a browser and enter the URL 10.0.0.1 in the "type a URL" section.