Activity

Gives Gateway configuration logs and Gateway's network logs.

Please refer to the Activity section following each configuration change to verify that the configuration has been updated successfully.

No.	List of Activities	Description
1	WiFi Connected	Gateway is connected to the network over the WiFi.
2	MQTT Connected	Gateway has established a successful connection with the MQTT broker and is ready to publish data and subscribe.
3	Ethernet Connected	Gateway is connected to the network via Ethernet.
4	4G Connected	Gateway is connected to cellular network via 4G.
5	4G Disconnected	Gateway has lost connection with cellular network.
6	Network Disconnected	Gateway is disconnected from MQTT or WiFi or Ethernet.
7	Network Configuration Updated	Network Configurations of the Gateway are updated from Network.
8	MQTT Settings Updated	Data routes of the Gateway are updated from Data Routes.
9	SSL Certificate Uploaded	SSL certificate (MQTT/s or HTTP/s) is uploaded in order to connect MQTTS or HTTPS.
10	Input 1 Configurations Updated	Input 1 mode, offset and slope is set.
11	Input 2 Configurations Updated	Input 2 mode, offset and slope is set.
12	MODBUS Configuration Updated	MODBUS Configurations are updated from MODBUS.
13	MODBUS Queries Added	Queries to receive data via MODBUS are added.
14	MODBUS Queries Erased	The queries added to receive data via MODBUS are erased.
15	Schedule Restart config Updated	Restart time for the Gateway is set from System.
16	Firmware Update Initiated	When firmware update is initiated.
17	Firmware Update Failed	Firmware update is failed due to weak network or improper .bin file.
18	Firmware Updated Successfully	Firmware is updated successfully.