Digital Input WiringConnection

  • Power on device using 24 VDC SMPS or adapter, where 24VDC will be connected to the 24V and Ground will be connected to the GND.

  • Digital Input Connection: -

    1. Sink Mode: - Connect COM(DI) to the OVDC. and Digital Input Signal must be active high, so, 24VDC will be given to respective input channel(X0-X7) to activate the input.

    2. Source Mode: - Connect COM(DI) to the 24VDC. and Digital Input Signal will be active low, so, 0VDC will be given to respective input channel(X0-X7) to activate the input.

    3. Wiring Diagram: -

PreviousWiring Setup of the Module.NextDigital Output Wiring Connection

Last updated